News

VIP 2017 - Virtuelle Instrumente in der Praxis

posted Oct 18, 2017, 2:17 AM by Stefan Mattsson   [ updated Oct 18, 2017, 2:22 AM ]

Today and tomorrow, 18-19 October, WireFlow is at the VIP-Kongress in Fürstenfeldbruck Germany. If you are visiting VIP 2017 then please come and visit us.


NIDays Poland

posted Oct 10, 2017, 1:28 AM by Stefan Mattsson

Today WireFlow is visiting NIDays in Warsaw Poland. Software Designer Jhonatan is ready to demonstrate the WireFlow products specifically made for LabVIEW applications. 


WireFlow presents a Smartphone Sensor Toolkit for LabVIEW

posted May 16, 2017, 6:11 AM by Stefan Mattsson   [ updated May 17, 2017, 6:08 AM ]

The WF Smartphone Sensor Toolkit for LabVIEW makes it possible to utilize smartphone sensor data in your LabVIEW application.
Just start the Sensor Bridge application on your smartphone, plug it into a Windows PC or a NI Real-Time target with a USB-cord and start collecting the sensor data.

Watch the video clip
Visit the product pages


WireFlow presents a Battery Stack Monitor and Balancing Module

posted May 16, 2017, 3:23 AM by Stefan Mattsson   [ updated May 16, 2017, 5:36 AM ]

The WF 3168 from WireFlow is a complete battery monitoring and balancing device that includes a high voltage input multiplexer, ADC and balancing switches for each battery cell. The module can measure up to 8 series-connected cells with a voltage up to 15V per cell.

Visit the product pages



Finally! The WF3132 module is now available on the cDAQ platform

posted Feb 28, 2017, 7:55 AM by Stefan Mattsson   [ updated Feb 28, 2017, 7:56 AM ]

WireFlow is proud to announce the first multiplexer module for the National Instrument cDAQ platform, and one of the first Third-Party modules ever on this platform.

Over the years we have gotten numerous requests to support our modules on the cDAQ platform. Until now, our answer has always been that third-party modules were limited to be used on the NI- RIO platform only.

Good news is, that this is about to change...

We have been working very closely with NI to get our WF3132 module available on the cDAQ platform, and are very pleased to tell you that we now have a cDAQ driver for WF3132 available!




The driver enables the WF3132 module to be used in both USB and Ethernet based cDAQ chassis, starting with LabVIEW 2013.

For more details check out these video clips: Installation , Example usage

Acticon uses LabVIEW™ for data acquisition in their Air and Acoustic Technology Laboratory

posted Feb 23, 2017, 3:06 AM by Stefan Mattsson   [ updated Feb 23, 2017, 3:14 AM ]

Acticon used products from National Instruments and services from WireFlow in order to quickly set up a data acquisition system for evaluation of ventilation products in their air and acoustic technology laboratory.




Welcome Fhilip

posted Jan 12, 2017, 6:06 AM by Stefan Mattsson

We welcome our new employee Fhilip Bergström. Fhilip has a M.Sc degree in Systems, Control & Mechatronics and will focus on embedded software design when joining the WireFlow team.


VIP 2016

posted Oct 26, 2016, 2:50 AM by Stefan Mattsson   [ updated Oct 26, 2016, 2:51 AM ]

Today and tomorrow , 26-27 November, you can find us at the VIP-Kongress in Fürstenfeldbruck Germany. If you are visiting VIP 2016 then please come and visit us at our booth.


WireFlow@NIWeek2016

posted Jul 5, 2016, 6:56 AM by Stefan Mattsson   [ updated Jul 5, 2016, 6:57 AM ]

WireFlow will attend NIWeek in Austin, Texas. This year the event will be held from August 1 to 4.
If you are at NIWeek then please come and visit us at booth no 933.


Welcome Jhonatan

posted May 4, 2016, 2:00 AM by Stefan Mattsson   [ updated May 4, 2016, 2:02 AM ]

We welcome our new employee Jhonatan Napadow. 
Jhonatan is a Certified LabVIEW Architect that has previously been working with architecture and development of LabVIEW-based SCADA systems and HMIs for well intervention systems at Aker solutions.


1-10 of 55